UNDERFLOOR HEATING CABLES

DRM Mini Heating Cables

HEM-SYSTEM® MINI heating mats with a one-sided connection and MINI thin-bed rings for installation in tile adhesive or leveling compounds. Ideally suited for renovating old buildings as well as for bathrooms, showers or similar. Also suitable as an installation kit for hot panels for self-assembly. Also suitable for boats, yachts, etc.

Pleasant Radiant Heat in Every Room!
With the HEM-SYSTEM® MINI heating mats and the MINI heating rings, every room can have electric underfloor heating because the MINI heating mats are just a few millimeters thick and can therefore be installed anywhere without difficulty. Electric underfloor heating is usually installed directly in the tile adhesive or in a leveling compound. The advantages here are obvious:

Direct Heating Effect
The heating effect starts almost at once, as shortly after the electric underfloor heating is switched on, the pleasant radiant heat rises. Long pre-heat times, as with underfloor heating from deeply laid water conduits or classic heating such as wall radiators, are eliminated and thus save energy effectively.

Ideal for Allergy-Sufferers
As modern electric underfloor heating only heats with floor temperatures of up to 28 °C, this creates a pleasant, gradual heat distribution in the room. There is no strong air circulation as would be necessary with classic radiators. This whirls up less dust and almost completely prevents the spread of dust mites thanks to the warm, dry floor.

Applications:

• Bathroom and Shower Floor Heating
• Renovation Projects Floor Heating
• Boat and Yacht Floor Heating
• Self-Assembly Hot Panel Applications
• Thin Bed Floor Heating Required Areas
• Irregular Shaped Area Floor Heating

BR-IM Mineral Insulated Concrete Heating Cables

BR-IM Concrete Heating Cables are specially designed cables that provide a long-lasting and reliable heating solution under harsh environmental conditions. With a mineral-insulated (MI) structure, these cables offer high-temperature resistance, excellent mechanical durability, and superior heat transfer, preventing concrete surfaces from freezing and enhancing structural safety. They are highly resistant to corrosion, impact, and chemical exposure, ensuring effective performance even in the most demanding industrial and commercial environments.

Application Areas:

• Bridges and Viaducts: Prevents snow and ice accumulation, improving traffic safety.
• Ramps and Roads: Prevents icing on roadways, ensuring safe passage for vehicles.
• Airport Runways: Keeps runway surfaces dry to allow safe aircraft landings and takeoffs.
• Industrial Facilities: Protects concrete surfaces in harsh environments such as cold storage areas, refineries, and factories.
• Parking Entrances and Walkways: Minimizes the risk of slipping and falling, enhancing pedestrian safety.
• Railway and Tramway Tracks: Prevents ice formation on rails and switches, ensuring uninterrupted transportation.

BR-IM Concrete Heating Cables provide a durable and efficient solution that can be embedded within or on the surface of concrete, maximizing safety and operational continuity during the winter months.

BR-IM-Z Extreme Conditions Resistant Concrete Heating Cables

BR-IM-Z Concrete Heating Cables are specially designed cables that provide a high-performance, durable, and long-lasting heating solution resistant to extreme weather conditions. With a mineral-insulated (MI) structure, these cables offer superior resistance to high temperatures, excellent mechanical durability, and resistance to abrasive environmental factors. Their advanced design prevents freezing on concrete surfaces, enhancing both traffic and pedestrian safety. Additionally, they provide high protection against corrosion, mechanical impacts, and chemicals, ensuring reliable performance even in the most demanding industrial and commercial environments.

Application Areas:

• Bridges and Viaducts: Prevents snow and ice accumulation, ensuring safe traffic flow.
• Ramps and Roads: Prevents ice formation on roadways, providing a secure driving experience.
• Airport Runways: Keeps runway surfaces dry, preventing aircraft from slipping during landing and takeoff.
• Industrial Facilities: Protects concrete surfaces in cold storage areas, refineries, and heavy industrial plants.
• Parking Entrances and Walkways: Reduces the risk of slipping and falling, ensuring safe pedestrian passage.
• Railway and Tramway Tracks: Prevents ice accumulation on rails and switches, ensuring uninterrupted transportation.
• Structures in Mountainous and Harsh Climate Conditions: Protects concrete surfaces even in extreme cold weather conditions.

BR-IM-Z Concrete Heating Cables provide a powerful, efficient, and durable solution that can be embedded within or applied to concrete surfaces, maximizing safety and operational continuity during winter months.

BH-IM Concrete Heating Mats Competent Warm

HEM-SYSTEM® Competent Warm® Heating mats with a one-sided connection and seamless sleeve transition. For underfloor storage/direct heating only in dry, humid and wet rooms, and under plaster and in floor screed.

Applications:

• Underfloor Storage Heating (Dry, Humid and Wet Rooms)
• Underfloor Direct Heating (Dry, Humid and Wet Rooms)
• Plaster Underfloor Heating
• Floor Screed Heating

Dual Circuit Controller

The Hemstedt regulator is specially designed for GREEN ELECTRIC MAT® and GREEN ACCU MAT® and controls the two heating conductors separately and in a manner optimized for consumption and need. A clear touch display allows the desired room temperature to be set conveniently or time-controlled operation with four individually programmable" bunu türkçeye çevir weekly programs.

In addition to the basic function of a floor heater, the output accessed by the regulator from the house grid can additionally be restricted by means of a control inlet, so that it can be used in connection with PV or other systems to generate renewable energy, particularly favorable for optimizing own consumption.

• Display of the current room temperature
• Clear presentation of up to 4 weekly programs
• Touch display
• Adjustable brightness of the display, ideal e.g. in bedrooms
• Combinable with Smart Home solutions

Depending on the current difference between the target and actual value of the floor temperature, the heating circuit regulator activates one or both of the heating circuits.

The dual circuit controller fulfils the requirements of EN 50559:2013 (VDE 0705-559) This standard applies to electric floor heating systems for residential buildings and all other buildings whose use corresponds to that of residential buildings or is at least similar to it, with a maximum traffic load of 4 kN/m². This standard defines the main properties of electric floor heating systems and establishes the test processes for these properties for the information of the users. Special feature of the dual circuit controller: in the case of heating outputs over 120 W/m², the heating function can be time-limited according to DIN.

Applications:

• GREEN ELECTRIC MAT® Floor Heating Systems
• GREEN ACCU MAT® Floor Heating Systems
• Dual Circuit Floor Heating Systems
• Smart Home Heating Systems

Dual Circuit Controller (For Twin Turbo Mat)

The Hemstedt regulator is specially designed for GREEN ELECTRIC MAT® and GREEN ACCU MAT® and controls the two heating conductors separately and in a manner optimized for consumption and need. A clear touch display allows the desired room temperature to be set conveniently or time-controlled operation with four individually programmable weekly programs.

In addition to the basic function of a floor heater, the output accessed by the regulator from the house network can additionally be restricted by means of a control inlet, so that it can be used in connection with PV or other systems to generate renewable energy, particularly favorable for optimizing own consumption.

• Display of the current room temperature
• Clear presentation of up to 4 weekly programs
• Touch display
• Adjustable brightness of the display, ideal e.g. in bedrooms
• Combinable with Smart Home solutions

Depending on the current difference between the target and actual value of the floor temperature, the heating circuit regulator activates one or both of the heating circuits.

This standard applies to electric floor heating systems for residential buildings and all other buildings whose use corresponds to that of residential buildings or is at least similar to it, with a maximum traffic load of 4 kN/m². This standard defines the main properties of electric floor heating systems and establishes the test processes for these properties for the information of the users. Special feature of the dual circuit controller: in the case of heating outputs over 120 W/m², the heating function can be time-limited according to DIN.

Applications:

• Twin Turbo Mat Floor Heating Systems
• GREEN ELECTRIC MAT® Floor Heating Systems
• GREEN ACCU MAT® Floor Heating Systems
• Dual Circuit Floor Heating Systems
• Smart Home Heating Systems

Twin Turbo Mat Fast Heating Tile Mat

The TWIN TURBO MAT® with one-sided connection and I-sleeve is the tile heating to allow you to heat your home quickly. The mat is laid in the tile adhesive. The particularly thin mat with narrow, sleeveless connection technology can be used in new as well as old buildings.

Applications:

• Bathroom Floor Heating (Areas Requiring Rapid Warm-up)
• Kitchen Floor Heating (Areas Requiring Rapid Warm-up)
• Renovation Projects Tile Heating (Thin Solution Required)
• New Construction Tile Heating (Areas Requiring Rapid Warm-up)

BHF-IM Outdoor Concrete Heating Mats

HEM-SYSTEM® heating mats and concrete heating cables with a one-sided connection and a seamless sleeve transition. Only for open spaces! Excellently suited for the thawing of ice and snow outdoors as well as for concrete and sand installations to melt snow and ice. Not for warm asphalt.

Applications:

• Outdoor Ice and Snow Melting
• Concrete and Sand Installations Ice and Snow Melting
• Ramps and Roads Ice Melting
• Parking Lot Entrances Ice Melting
• Pedestrian Walkways Ice Melting

BRF-IM Concrete Heating Cables D-Cold

HEM-SYSTEM® heating mats and concrete heating cables with a one-sided connection and a seamless sleeve transition. Only for open spaces! Excellently suited for the thawing of ice and snow outdoors as well as for concrete and sand installations to melt snow and ice. Not for warm asphalt.

Applications:

• Outdoor Ice and Snow Melting (D-Cold Applications)
• Concrete and Sand Installations Ice and Snow Melting (D-Cold Applications)
• Ramps and Roads Ice Melting (D-Cold Applications)
• Parking Lot Entrances Ice Melting (D-Cold Applications)
• Pedestrian Walkways Ice Melting (D-Cold Applications)

D-Cold BHF-IM Outdoor Heating Mats

HEM-SYSTEM® heating mats with a one-sided connection and a seamless sleeve transition. Only for open spaces! Excellently suited for the thawing of ice and snow outdoors as well as for concrete and sand installations to melt snow and ice. Not suitable for bitumen.

Applications:

• Outdoor Ice and Snow Melting (D-Cold Applications)
• Concrete and Sand Installations Ice and Snow Melting (D-Cold Applications)
• Ramps and Roads Ice Melting (D-Cold Applications)
• Parking Lot Entrances Ice Melting (D-Cold Applications)
• Pedestrian Walkways Ice Melting (D-Cold Applications)