The Hemstedt regulator is specially designed for GREEN ELECTRIC MAT® and GREEN ACCU MAT® and controls the two heating conductors separately and in a manner optimized for consumption and need.
The Hemstedt regulator is specially designed for GREEN ELECTRIC MAT® and GREEN ACCU MAT® and controls the two heating conductors separately and in a manner optimized for consumption and need. A clear touch display allows the desired room temperature to be set conveniently or time-controlled operation with four individually programmable" bunu türkçeye çevir weekly programs.
In addition to the basic function of a floor heater, the output accessed by the regulator from the house grid can additionally be restricted by means of a control inlet, so that it can be used in connection with PV or other systems to generate renewable energy, particularly favorable for optimizing own consumption.
Depending on the current difference between the target and actual value of the floor temperature, the heating circuit regulator activates one or both of the heating circuits.
The dual circuit controller fulfils the requirements of EN 50559:2013 (VDE 0705-559) This standard applies to electric floor heating systems for residential buildings and all other buildings whose use corresponds to that of residential buildings or is at least similar to it, with a maximum traffic load of 4 kN/m². This standard defines the main properties of electric floor heating systems and establishes the test processes for these properties for the information of the users. Special feature of the dual circuit controller: in the case of heating outputs over 120 W/m², the heating function can be time-limited according to DIN.
Applications:
| TECHNICAL DATA | |
|---|---|
| Nominal operating voltage | AC 230 V ±10 %, 50 Hz |
| Nominal load | max. 10 A at AC 230 V; two-pole with separate relay, each max. 5 A |
| Floor temperature restriction | Adjustable from 20 to 40 °C |
| Max. adjustable range | 10 .. 40 °C |
| Floor sensor monitoring | Short circuit and interruption monitoring |
| Integration into outlet sockets | According to DIN 49073, floating |
| Protection class | II, with corresponding integration |
| Protection type | IP20, use at room temperature |
| Device security and EMC | According to EN 60730-1, EN 60730-2-9, EN 50559 |
| Sensor | 2 m |
The Hemstedt regulator is specially designed for GREEN ELECTRIC MAT® and GREEN ACCU MAT® and controls the two heating conductors separately and in a manner optimized for consumption and need. A clear touch display allows the desired room temperature to be set conveniently or time-controlled operation with four individually programmable" bunu türkçeye çevir weekly programs.
In addition to the basic function of a floor heater, the output accessed by the regulator from the house grid can additionally be restricted by means of a control inlet, so that it can be used in connection with PV or other systems to generate renewable energy, particularly favorable for optimizing own consumption.
Depending on the current difference between the target and actual value of the floor temperature, the heating circuit regulator activates one or both of the heating circuits.
The dual circuit controller fulfils the requirements of EN 50559:2013 (VDE 0705-559) This standard applies to electric floor heating systems for residential buildings and all other buildings whose use corresponds to that of residential buildings or is at least similar to it, with a maximum traffic load of 4 kN/m². This standard defines the main properties of electric floor heating systems and establishes the test processes for these properties for the information of the users. Special feature of the dual circuit controller: in the case of heating outputs over 120 W/m², the heating function can be time-limited according to DIN.
Applications: