FLOOR HEATING MATS
GREEN ACCU MAT® Energy Storage Heating Mat
The GREEN ACCU MAT® with a one-sided connection and sleeveless connection technology is the storage and direct heater for more efficiency and comfort. The mat is installed under the floor at a depth of approximately 8 – 10 cm. The GREEN ACCU MAT® uses the floor and concrete as a storage medium. Specially designed for low-energy houses.
Applications:
- Low Energy House Heating
- Underfloor Heating (Storage and Direct Heating)
- New Construction Heating Systems
- Renovation Projects Heating Systems
GREEN ELECTRIC MAT® Thin Structure Tile Heating Mat
The GREEN ELECTRIC MAT® with a one-sided connection and sleeveless connection technology is the tile heater for more efficient heating. The mat is installed in the tile adhesive. The particularly thin mat with slim, sleeveless connection technology can be used in both new and old buildings.
Applications:
- Tile Floor Heating (Bathroom, Kitchen, Hallway)
- Renovation Projects Tile Heating
- New Construction Tile Heating
- Thin Floor Heating Required Areas
DHSU Thin Bed Heating Mat Set
HEM-SYSTEM® heating mats with a one-sided connection for installation in tile adhesive/or leveling compounds. Ideally suited to renovations of old buildings, new buildings as well as for bathrooms, showers, living rooms, offices, etc. The sleeveless technology also makes it especially suitable for walk-in showers.
The thin-bed heating mat set contains the following products:
- HEM direct heating mat with a single connection 150 W/m² and 4.00 m connection
- Temperature control with self-learning clock thermostat and sensor, UP
- Sensor sleeve for the sensor pipe
- Sensor pipe for the room thermostat
- Switch
- Assembly instruction
Applications:
- Tile Floor Heating (Bathroom, Shower, Living Room, Office)
- Renovation Projects Tile Heating
- New Construction Tile Heating
- Thin Bed Floor Heating Required Areas
DR-Premium Thin-Bed Heating Cables
With the Hemstedt thin-bed heating mats, every room can have electric underfloor heating because the heating mats are just a few millimeters thick and can therefore be installed anywhere without difficulty. Electric underfloor heating is usually installed directly in the tile adhesive or in a leveling compound.
Applications:
- All Interior Floor Heating (Bathroom, Kitchen, Living Room, etc.)
- Renovation Projects Floor Heating
- New Construction Floor Heating
- Thin Bed Floor Heating Required Areas
- Irregular Shaped Area Floor Heating
ALU-Z Dry Floor Heating Mat
Heating mats with a two-sided connection. The aluminium coating, applied onto a textile glass fabric, allows for a homogeneous heat distribution below the floor covering. Thanks to the low structural height of approx. 5 mm + floor covering, this product is ideally suited for renovations and new buildings. And fulfills all the requirements for installation on yachts.
The product is controlled via a thermostat perfectly matched to this product. The HEM dry laying system is manufactured in accordance with VDE 60335-2-96.
Laying (short description): If required, a vapor barrier should be laid and fixed. The room is completely covered with temperature-resistant impact noise and heat insulation (B2). Cover the area with our HEM dry laying system. Apply the floor covering.
Applications:
- Laminate Flooring Underfloor Heating
- Parquet Flooring Underfloor Heating
- Renovation Projects Floor Heating
- New Construction Floor Heating
- Yacht Heating
DHM Mini Thin-Bed Heating Mats
HEM-SYSTEM® MINI heating mats with a one-sided connection and MINI thin-bed rings for installation in tile adhesive or leveling compounds. Ideally suited for renovating old buildings as well as for bathrooms, showers or similar. Also suitable as an installation kit for hot panels for self-assembly. Also suitable for boats, yachts, etc.
Pleasant Radiant Heat in Every Room!
With the HEM-SYSTEM® MINI heating mats and the MINI heating rings, every room can have electric underfloor heating because the MINI heating mats are just a few millimeters thick and can therefore be installed anywhere without difficulty. Electric underfloor heating is usually installed directly in the tile adhesive or in a leveling compound. The advantages here are obvious:
Direct Heating Effect
The heating effect starts almost at once, as shortly after the electric underfloor heating is switched on, the pleasant radiant heat rises. Long pre-heat times, as with underfloor heating from deeply laid water conduits or classic heating such as wall radiators, are eliminated and thus save energy effectively.
Ideal for Allergy-Sufferers
As modern electric underfloor heating only heats with floor temperatures of up to 28 °C, this creates a pleasant, gradual heat distribution in the room. There is no strong air circulation as would be necessary with classic radiators. This whirls up less dust and almost completely prevents the spread of dust mites thanks to the warm, dry floor.
Applications:
- Bathroom and Shower Floor Heating
- Renovation Projects Floor Heating
- Boat and Yacht Floor Heating
- Self-Assembly Hot Panel Applications
- Thin Bed Floor Heating Required Areas
DH-Premium Thin Bed Heating Mats
With the Hemstedt thin-bed heating mats, every room can have electric underfloor heating because the heating mats are just a few millimeters thick and can therefore be installed anywhere without difficulty. Electric underfloor heating is usually installed directly in the tile adhesive or in a leveling compound.
Applications:
- All Interior Floor Heating (Bathroom, Kitchen, Living Room, etc.)
- Renovation Projects Floor Heating
- New Construction Floor Heating
- Thin Bed Floor Heating Required Areas