EX PROOF HEAT TRACING EQUIPMENT

DPC III Standard Temperature Control Device

• Pre-defined parameters for two-position controller
• Easy setup, fast commissioning
• Load relay/alarm relay/logic output for semi-conductor relay

The DPC III Standard Temperature Controller is a basic controller, which in the factory setting can be used as a two-position controller with two-relay outputs for control and alarm signalling for standard applications. Due to the default basic setting only the setpoint and the alarm level(s) need to be set. The easy start-up function makes this extremely user-friendly. As an alternative, the same device can also be used as a controller with PID control characteristics and an external semi-conductor relay.

Application Areas:

• Industrial furnaces and dryers
• Plastic processing machines (extruders, injection machines)
• Food processing equipment
• Chemical processes
• Laboratory equipment
• Power plants
• HVAC systems
• Extruder Heating
• Hot press applications
• Heat treatment plants
• Packaging machines
• Cooling systems
• Ceramic kilns
• Incubators
• Medical equipment
• Simple heating and cooling applications
• Paint ovens
• Textile machines

DPC III Monitor Temperature Control Device

• Pre-defined parameters for two-position controller
• Easy setup, fast commissioning
• Load relay/alarm relay/logic output for semi-conductor relay
• RS 485 Modbus

The DPC III Monitor Temperature Controller is a basic controller which in the factory setting can be used as a ON/OFF controller with two relay outputs for control and alarm signalling for standard applications. Due to the default basic setting only the setpoint and the alarm level(s) need to be set. The easy start-up function makes this extremely user-friendly. As an alternative, the same device can also be used as a controller with PID control characteristics and an external semi-conductor relay. The monitor version is equipped with an RS485 interface and MODBUS protocol.

Application Areas:

• Industrial process monitoring and control
• Laboratory environments
• Cold storage and food storage
• Pharmaceutical and medical supply storage
• Data centers and server rooms
• Greenhouse and agricultural applications
• HVAC systems monitoring
• Furnace and drying systems monitoring
• Extruder Heating monitoring
• Hot press applications monitoring
• Climate control systems
• Environmental monitoring

Pt100 Ex Resistance Thermometer

• Very fast response time
• Compact dimensions, compact design
• Wide temperature range

This Pt100 Ex sheathed resistance thermometer has been particularly designed for use in potentially explosive areas. As it meets the requirements of the Ex m type of protection, intrinsically safe circuits can be dispensed with. Thanks to the pliable part of the resistance thermometer, the device is excellently suitable for application areas requiring a high degree of flexibility and replaceability (e.g. chemical and power plants)

Structure The resistance thermometer is made of a 3 mm mineral insulated cable with different lengths. This light mineral insulated cable is filled with magnesium oxide. The pliable part of the resistance thermometer starts after 50 mm. Via a transition gland, the connection to a flexible supply cable is created.

Function Metals increase the electrical resistance with rising temperatures. The platinum element of the resistance thermometer has a resistance of 100 Ω at 0 °C. This characteristic is used for this type of resistance thermometers to get an image of the temperature. The resistance changes of the Pt100 Ex are converted into a temperature value and displayed by a control unit.

Application Areas:

• Oil and gas industry (refineries, platforms)
• Chemical industry (chemical plants)
• Mining
• Paint industry
• Flour and sugar factories
• High temperature furnaces (in hazardous areas)
• Heat treatment plants (in hazardous areas)
• Hazardous material storage
• Extruder Heating (in hazardous areas)
• Hot press applications (in hazardous areas)
• Heating cable applications (in hazardous areas)
• Sensor connections (in hazardous areas)
• All applications requiring temperature measurement in hazardous areas.

KTE-m Cable Thermostat

• Very small construction
• ATEX gas and dust approval
• High switching current
• Wide operating temperature range
• Ready for connection, maintenance-free

The extremely compact BARTEC bimetallic thermostat integrated in a cable is mostly used in hazardous (potentially explosive) areas for applications in which devices are to be protected against frost. This thermostat can be used to regulate internal temperatures of switch and control cabinets, transmitter protection boxes, measuring equipment etc.. It can also be used to monitor (indicate) excessively high or low temperatures or also as an alarm contact. The application assures the greatest possible reliability because of the conformance to the required minimum temperatures

Application Areas:

• Freeze protection of pipelines and tanks
• Control of heating cables
• Cold room heating
• Floor heating
• Industrial process heating
• HVAC systems
• Extruder Heating
• Hot press applications.

STRUCTURE

The thermostat is built into a casting element and can be mounted either over the borehole in the mounting sheet or suspended freely in the air.

FUNCTION

The ambient temperature is measured through the surface of the thermostat. The integrated, explosion-proof bimetallic thermostat switches the connected heating in accordance with this ambient temperature.

KTE-d Cable Thermostat

• Very small construction
• ATEX gas and dust approval
• High switching current
• Wide operating temperature range
• Ready for connection, maintenance-free

The compact BARTEC bimetallic thermostat integrated in a cable is mostly used in hazardous (potentially explosive) areas for applications in which devices are to be protected against frost. This thermostat can be inserted both for the outside temperature monitoring and for the regulation of interior temperatures of switch and control cabinets, transmitter protection boxes, measuring equipment etc. It can also be used to monitor (indicate) excessively high or low temperatures or also as an alarm contact. The application assures the greatest possible reliability because of the conformance to the required minimum temperatures

Application Areas:

• Freeze protection of pipelines and tanks (dual circuit control)
• Control of heating cables (dual circuit control)
• Cold room heating (dual circuit control)
• Floor heating (dual circuit control)
• Industrial process heating (dual circuit control)
• HVAC systems (dual circuit control)
• Extruder Heating (dual circuit control)
• Hot press applications (dual circuit control)
• Redundant heating systems (dual circuit control)

STRUCTURE

The thermostat is built into an aluminum body. The thermostat can be installed either over the mounting hole with M6 thread or with the M20 connecting thread.

FUNCTION

The ambient temperature is measured through the surface of the thermostat. The integrated, explosion-proof bimetallic thermostat switches the connected heating in accordance with this ambient temperature

Mini-Thermostat Bimetall Temperature Switch

• Very small construction
• Frost-protection

This mini-thermostat is used both for monitoring the temperature outside the heating systems and also for regulating the temperature inside transmitter protection boxes or switch and control cabinets. It can also be used for monitoring (indicating) temperatures that are too high or too low and it can serve as an alarm contact.

Application Areas:

• Small ovens and heaters
• Laboratory equipment
• Food processing equipment
• Plastic processing machines
• 3D printers
• Incubators
• Refrigerators and freezers
• Coffee machines and water heaters
• Extruder Heating
• Hot press applications
• Overheating protection for motors and electronic devices
• Air conditioning systems
• Ventilation systems

KRM Capillary Tube Thermostat 16 A

• 16 A switching capacity
• Compact enclosure
• Double units are standard

The weather-proof capillary tube thermostat, KRM, is a mechanical change-over controller housed in a polyester enclosure. Heaters, fans, motors and other equipment are energised and de-energised when temperatures fall below or rise above certain limits. It can also be used to control the temperature in air, liquids and on various surfaces.

FUNCTION

Any change in temperature at the sensor causes a change in the volume of fluid in the measuring system, which in turn results in a movement of the diaphragm membrane. This membrane is connected to a mechanical device that activates a microswitch. If the temperature at the sensor bulb exceeds the pre-set value, terminals 1 and 2 are opened. If the temperature falls below the minimum setting, the contacts automatically close

APPLICATION EXAMPLE

The KRM thermostat can directly switch temperature-dependent equipment loads (heaters etc.) of up to 16 A. Higher switching currents of 3-phase applications are switched by means of a contactor

DEPU Complete Digital Solution – Controller-Limiter-Power Setpoint

• Complete solution for trace heating: controller, limiter and power setpoint adjustment all in one unit
• Alteration of adjusting parameters also possible in potentially explosive areas
• Current carrying capacity 25 A
• Fault-free full wave contro
• Sensor input, intrinsically safe
• Allows easy output adaptation to heating circuit changes

DEPU serves as complete solution for pipe heating and provides temperature control, limitation and power output control in one device. DEPU is ATEX-certified and approved for use in potentially explosive areas.

Application Areas:

• Industrial furnaces and dryers
• Heat treatment plants
• Plastic processing machines (extruders, injection machines)
• Food processing equipment
• Chemical processes
• Laboratory equipment
• Power plants
• HVAC systems
• Extruder Heating
• Hot press applications.

STRUCTURE

All functional units are integrated in a standard Ex e aluminium enclosure. Connection to mains is established through 6 mm² tension clamp terminals

FUNCTION

The controller is designed as a ON/OFF controller and measures the temperature through RTD sensor inputs. The limiter works as an independent system and measures the temperature at the hot spot with its own sensor. If the temperature exceeds the limit value the limiter interrupts the heating circuit permanently from mains and a fault alarm signal is given

The power output controller works in interference free full wave control mode by means of a semi-conductor relay. Two 7-segment displays guarantee good readability of the controller and limiter temperature values through the lid's w

Junction Boxes For Pt100 Ex

The Pt100 Ex junction boxes allow one or more two-wire or three-wire Pt100 resistance thermometers to be connected to the signal line. The enclosures have the appropriate terminals and the required cable glands. Aluminium junction boxes are available upon request.

Application Areas:

• Oil and gas industry (refineries, platforms)
• Chemical industry (chemical plants)
• Mining
• Paint industry
• Flour and sugar factories
• High temperature furnaces (in hazardous areas)
• Heat treatment plants (in hazardous areas)
• Hazardous material storage
• Extruder Heating (in hazardous areas)
• Hot press applications (in hazardous areas)
• Heating cable applications (in hazardous areas)
• Sensor connections (in hazardous areas)
• All applications requiring Pt100 sensor connections in hazardous areas.

Junction Boxes For Pt100 M

The polyester junction boxes allow one or more two-wire or three-wire Pt100 M resistance thermometers to be connected to the signal line. The enclosures have the appropriate terminals and the required cable glands. Aluminium junction boxes are available upon request.

Application Areas:

• Industrial furnaces and dryers
• Chemical processes
• Food processing
• Pharmaceutical production
• Power plants
• Metal processing
• Automotive industry
• Aerospace industry
• Nuclear power plants
• Extruder Heating
• Hot press applications
• High temperature pipelines
• Tank heating
• Steam lines
• Heat treatment furnaces
• High temperature reactors
• All industrial applications requiring Pt100 sensor connections.

PSBL System Junction Box

Features

• Wide temperature range
• Can be combined with connection technology PLEXO, heat shrink and cold-applied technology
• Flame-retardant
• Impact-resistant
• System approval

Explosion protection:
Ex protection type System

• II 2G Ex e IIC T5Gb
• II 2D Ex tb IIIC T 95 °C Db

Certification System

• KEMA 08 ATEX 0112
• IECEx KEM 09.0085X
• TC RU C-DE.ГБ06.B.00230

Elbette, PSBL Sistem Bağlantı Kutusu için istediğiniz formatta uygulama alanlarını yazıyorum:

Uygulama Alanları:

• Endüstriyel Isıtma Sistemleri Bağlantıları
• Kendi Kendini Sınırlayan Isıtma Bantları Bağlantıları
• Isı İle Daralan Bağlantılar
• Soğuk Uygulama Teknolojisi Bağlantıları
• Patlayıcı Ortamlardaki Isıtma Sistemleri Bağlantıları
• Proses Isıtma Uygulamaları Bağlantıları
• Donmaya Karşı Koruma Sistemleri Bağlantıları
• Boru Hattı Isıtma Sistemleri Bağlantıları
• Tank Isıtma Sistemleri Bağlantıları
• Vana Isıtma Sistemleri Bağlantıları
• Kimyasal Tesisler
• Petrokimya Tesisleri
• Petrol ve Gaz Endüstrisi
• Enerji Santralleri
• Endüstriyel Otomasyon Sistemleri
• Tehlikeli Alan Isıtma Sistemleri

Application:

• Industrial Heating Systems Connections
• Self-Limiting Heating Tape Connections
• Heat Shrink Connections
• Cold Application Technology Connections
• Heating Systems Connections in Explosive Atmospheres
• Process Heating Applications Connections
• Freeze Protection Systems Connections
• Pipeline Heating Systems Connections
• Tank Heating Systems Connections
• Valve Heating Systems Connections

PSBL System Cold-Applied Technology Media Protected

For direct connection of self-limiting heating tape PSBL (Order no. 07-5807-....) into the junction boxthe 2 supply leads are insulated by silicone glue and a silicone hose. A green-yellow protection tube is pulled over the tinned copper braiding inside the insulation sheath. The copper braiding is prepared to be connected to the protective earth. The end of the self-limiting heating tape is insulated with silicone glue and a silicone end cap.

Features:

• Direct entry of a heating tape into the junction box
• Connection and termination in one set
• Space-saving solution
• Easy design and assembling with silicone cold-applied technology

Application Areas:

• Oil and gas pipelines
• Chemical plants
• Water and wastewater pipelines
• Refrigeration systems
• HVAC systems
• Extruder Cooling
• Hot press applications (cooling)
• Food processing plants
• Pharmaceutical production plants
• Marine applications
• Underground pipelines
• All pipelines requiring freeze protection
• All pipelines requiring corrosion protection
• All pipelines requiring temperature maintenance