DPC III Standard Temperature Control Device

Brand: BARTEC Category: EX PROOF HEAT TRACING EQUIPMENT

Ex Proof Heat Tracing Equipment - DPC III Standard Temperature Control Device

Rated 5.00 out of 5 based on 1 customer rating

DPC III Standard Temperature Control Device

Pre-defined parameters for two-position controller
Easy setup, fast commissioning
Load relay/alarm relay/logic output for semi-conductor relay

The DPC III Standard Temperature Controller is a basic controller, which in the factory setting can be used as a two-position controller with two-relay outputs for control and alarm signalling for standard applications. Due to the default basic setting only the setpoint and the alarm level(s) need to be set. The easy start-up function makes this extremely user-friendly. As an alternative, the same device can also be used as a controller with PID control characteristics and an external semi-conductor relay.

Application Areas:

Industrial furnaces and dryers
Plastic processing machines (extruders, injection machines)
Food processing equipment
Chemical processes
Laboratory equipment
Power plants
HVAC systems
Extruder Heating
Hot press applications
Heat treatment plants
Packaging machines
Cooling systems
Ceramic kilns
Incubators
Medical equipment
Simple heating and cooling applications
Paint ovens
Textile machines

Product Description

DPC III Standard Temperature Control Device

TECHNICAL DATA
Control characteristic	ON/OFF, PID
Sensor input	Pt100, mV Standard signals Thermocouple J, K, S
Inputs impedance	at mV: 1 MΩ
Measuring ranges	depending on the sensor version
Measuring accuracy with resistance thermometers with thermocouples	(±0.5 % of the actual level or ±1 °C; the higher level applies) ±1 digit (±0.5 % of the actual level or ±1 °C; the higher level applies) ±1 digit (see additional reference junction accuracy)
Accuracy of the reference junction with thermocouple measurement	0.04 °C for each °C of the controller’s operating temperature (after 20 min. of controller operating time)
Sampling frequency at the sensor input	7.5 Hz
Ambient temperature range	0 °C to +50 °C
Weight	0.2 kg
Digital input	two, non-floating, i. e. floating contact(s) required (contact loadability minimum 5 V, 5 mA)
Output 1	Relay output 1 normally open contact (16 A - AC 1, 250 V)
Output 2	Relay output 1 change-over contact (8 A - AC 1, 250 V)
Output 3	Logic output for SSR control (DC 11 V/20 mA)
Electrical service life of the relay outputs	At least 100,000 switching cycles
Protection class	II
Power consumption	max. 5 VA (depending on the output connection)