HOME-INDOOR FLOOR HEATING PRODUCTS

Heating Mats 100 W/m2  - Width 25 cm

Below tiles, marbles or other floor pavements with a minimum thickness from 12 to 20 mm (including the thermal insulation). Main or auxiliary heating system. Easy and fast installation by unrolling the mat, as the heating cable is already fixed at the correct pattern on a fiber glass mesh support.

We manufacture a wide range of heating mats to fit the needs of any areas. From 60W/m2 for new construction, well insulated houses or low energy consumption buildings, up to 180W/m2 for small bathroom where the available surface (floor surface discounting furniture, bathtubs, etc…) is reduced. The loop cable distance on the supporting mesh varies from 8 to 12 cm for a perfect heat distribution when located right below the floor pavement and up to 18 cm for semi-storage system (3-5 cm below floor pavement).

Advantages:

• No electromagnetic emission
• Suitable for damp environment IP 67
• Safe, flame retardant
• Installation with cement or screed
• Elements with standard length. Never cut the heating cable.

Applications:

• Bathroom floors
• Kitchen floors
• Living room floors
• Other indoor floors

Heating Mats 100 W/m2  - Width 50 cm

Below tiles, marbles or other floor pavements with a minimum thickness from 12 to 20 mm (including the thermal insulation). Main or auxiliary heating system. Easy and fast installation by unrolling the mat, as the heating cable is already fixed at the correct pattern on a fiber glass mesh support.

We manufacture a wide range of heating mats to fit the needs of any areas. From 60W/m2 for new construction, well insulated houses or low energy consumption buildings, up to 180W/m2 for small bathroom where the available surface (floor surface discounting furniture, bathtubs, etc…) is reduced. The loop cable distance on the supporting mesh varies from 8 to 12 cm for a perfect heat distribution when located right below the floor pavement and up to 18 cm for semi-storage system (3-5 cm below floor pavement).

Advantages:

• No electromagnetic emission
• Suitable for damp environment IP 67
• Safe, flame retardant
• Installation with cement or screed
• Elements with standard length. Never cut the heating cable.

Applications:

• Bathroom floors
• Kitchen floors
• Living room floors
• Other indoor floors

Heating Mats 120 W/m2  - Width 50 cm

Below tiles, marbles or other floor pavements with a minimum thickness from 12 to 20 mm (including the thermal insulation). Main or auxiliary heating system. Easy and fast installation by unrolling the mat, as the heating cable is already fixed at the correct pattern on a fiber glass mesh support.

We manufacture a wide range of heating mats to fit the needs of any areas. From 60W/m2 for new construction, well insulated houses or low energy consumption buildings, up to 180W/m2 for small bathroom where the available surface (floor surface discounting furniture, bathtubs, etc…) is reduced. The loop cable distance on the supporting mesh varies from 8 to 12 cm for a perfect heat distribution when located right below the floor pavement and up to 18 cm for semi-storage system (3-5 cm below floor pavement).

Advantages:

• No electromagnetic emission
• Suitable for damp environment IP 67
• Safe, flame retardant
• Installation with cement or screed
• Elements with standard length. Never cut the heating cable.

Applications:

• Bathroom floors
• Kitchen floors
• Living room floors
• Other indoor floors

Heating Mats 85 W/m2  - Width 70 cm

Below tiles, marbles or other floor pavements with a minimum thickness from 12 to 20 mm (including the thermal insulation). Main or auxiliary heating system. Easy and fast installation by unrolling the mat, as the heating cable is already fixed at the correct pattern on a fiber glass mesh support.

We manufacture a wide range of heating mats to fit the needs of any areas. From 60W/m2 for new construction, well insulated houses or low energy consumption buildings, up to 180W/m2 for small bathroom where the available surface (floor surface discounting furniture, bathtubs, etc…) is reduced. The loop cable distance on the supporting mesh varies from 8 to 12 cm for a perfect heat distribution when located right below the floor pavement and up to 18 cm for semi-storage system (3-5 cm below floor pavement).

Advantages:

• No electromagnetic emission
• Suitable for damp environment IP 67
• Safe, flame retardant
• Installation with cement or screed
• Elements with standard length. Never cut the heating cable.

Applications:

• Bathroom floors
• Kitchen floors
• Living room floors
• Other indoor floors

Heating Mats 60 W/m2  - Width 70 cm

Below tiles, marbles or other floor pavements with a minimum thickness from 12 to 20 mm (including the thermal insulation). Main or auxiliary heating system. Easy and fast installation by unrolling the mat, as the heating cable is already fixed at the correct pattern on a fiber glass mesh support.

We manufacture a wide range of heating mats to fit the needs of any areas. From 60W/m2 for new construction, well insulated houses or low energy consumption buildings, up to 180W/m2 for small bathroom where the available surface (floor surface discounting furniture, bathtubs, etc…) is reduced. The loop cable distance on the supporting mesh varies from 8 to 12 cm for a perfect heat distribution when located right below the floor pavement and up to 18 cm for semi-storage system (3-5 cm below floor pavement).

Advantages:

• No electromagnetic emission
• Suitable for damp environment IP 67
• Safe, flame retardant
• Installation with cement or screed
• Elements with standard length. Never cut the heating cable.

Applications:

• Bathroom floors
• Kitchen floors
• Living room floors
• Other indoor floors

Heating Mats 115 W/m2  - Width 70 cm

Below tiles, marbles or other floor pavements with a minimum thickness from 12 to 20 mm (including the thermal insulation). Main or auxiliary heating system. Easy and fast installation by unrolling the mat, as the heating cable is already fixed at the correct pattern on a fiber glass mesh support.

We manufacture a wide range of heating mats to fit the needs of any areas. From 60W/m2 for new construction, well insulated houses or low energy consumption buildings, up to 180W/m2 for small bathroom where the available surface (floor surface discounting furniture, bathtubs, etc…) is reduced. The loop cable distance on the supporting mesh varies from 8 to 12 cm for a perfect heat distribution when located right below the floor pavement and up to 18 cm for semi-storage system (3-5 cm below floor pavement).

Advantages:

• No electromagnetic emission
• Suitable for damp environment IP 67
• Safe, flame retardant
• Installation with cement or screed
• Elements with standard length. Never cut the heating cable.

Applications:

• Bathroom floors
• Kitchen floors
• Living room floors
• Other indoor floors

Heating Mats 100 W/m2  - Width 25 cm

Below tiles, marbles or other floor pavements with a minimum thickness from 12 to 20 mm (including the thermal insulation). Main or auxiliary heating system. Easy and fast installation by unrolling the mat, as the heating cable is already fixed at the correct pattern on a fiber glass mesh support.

We manufacture a wide range of heating mats to fit the needs of any areas. From 60W/m2 for new construction, well insulated houses or low energy consumption buildings, up to 180W/m2 for small bathroom where the available surface (floor surface discounting furniture, bathtubs, etc…) is reduced. The loop cable distance on the supporting mesh varies from 8 to 12 cm for a perfect heat distribution when located right below the floor pavement and up to 18 cm for semi-storage system (3-5 cm below floor pavement).

Advantages:

• No electromagnetic emission
• Suitable for damp environment IP 67
• Safe, flame retardant
• Installation with cement or screed
• Elements with standard length. Never cut the heating cable.

Applications:

• Bathroom floors
• Kitchen floors
• Living room floors
• Other indoor floors

MT26 Electronic Heating Thermostat - Analog Thermostat

Temperature Setting

Thermostat has a scale range of +5/+40 . To assist the adjust- ment, the thermostat has a LED which will glow RED when the heating is ON. The thermostat should be set to maximum tem- perature setting until the desired temperature of the room or floor is achieved. The control knob should then be turned back until the LED goes out. Fine adjustments can be made over the next 1/2 days to suit individual requirements. Thermostat Adjustment When the room temperature has been stabilized, the thermos- tat set position may be adjusted to match actual room tempera- ture. Measure the temperature of the room with an accurate thermometer. Remove control knob(1) and spin the pole(D), then reposition the control knob so that the indicated tempera- ture line shows the same as the measured temperature (picture 2). We have adjusted the temperature, please do not spin the pole when installation. Max./Min. Temperature Setting A locking mechanism is positioned behind the control knob to limit the amount of adjustment possible. By loosening the little screw C (picture2)the scale range can be locked, e.g. Between 20 and 25 . The above ring indicates the maximum tempera- ture and the below ring indicates the minimum temperature.

Thermostat Adjustment

When the room temperature has been stabilized, the thermos- tat set position may be adjusted to match actual room tempera- ture. Measure the temperature of the room with an accurate thermometer. Remove control knob(1) and spin the pole(D), then reposition the control knob so that the indicated tempera- ture line shows the same as the measured temperature (picture 2). We have adjusted the temperature, please do not spin the pole when installation.

Max./Min. Temperature Setting

A locking mechanism is positioned behind the control knob to limit the amount of adjustment possible. By loosening the little screw C (picture2)the scale range can be locked, e.g. Between 20 and 25 . The above ring indicates the maximum tempera- ture and the below ring indicates the minimum temperature

Applications:

• Residential heating systems (underfloor heating, radiator heating)
• Office heating systems
• Shop and commercial space heating systems
• Laboratories and areas requiring precise temperature control
• Warehouses and industrial areas
• Greenhouse and agricultural applications
• Bathroom and shower area heating systems
• Winter gardens and veranda heating systems
• Hotel and accommodation facility heating systems
• Hospitals and healthcare facility heating systems

Aluminium Mat 80 W/m2

Below laminated floor, ideal for renovation with a minimum thickness of 8 mm including the 6mm thermal insulation. Easy, fast and clean installation (no cement). Main or auxiliary heating system.

Advantages:

• No electromagnetic emission
• Safe, flame retardant
• Dry installation
• Suitable for damp environment IP 67
• Elements with standard length. Never cut the heating cable.

Applications:

• Laminated Flooring Living Areas
• Renovation Projects
• Areas Where Dry Installation is Preferred

OJ Electronics MWD5 Smart Thermostat Series

OJ Electronics MWD5 Series

The OJ Electronics MWD5 series offers smart touch thermostats specifically designed for electric underfloor heating systems. With WiFi connectivity, users can remotely control temperature settings via a smartphone app, optimize energy savings, and enhance daily comfort.

Its modern and stylish design makes it easy to use in both residential and commercial spaces. The built-in temperature sensor and 3m floor sensor provide precise temperature control, ensuring the efficient operation of underfloor heating systems. The touchscreen display offers a user-friendly interface, while its intuitive menus make installation and operation extremely easy.

These smart thermostats are classified under IP21 protection and, with their 16A capacity, they are compatible with a wide range of heating systems. The intelligent energy management system ensures that the system operates only when necessary, reducing electricity consumption and cutting costs.

Application Areas

 Residential Use

 Precise control of underfloor heating systems in homes
 Seamless integration with smart home systems
 Remote temperature management for vacation homes

 Commercial Use Central heating control in office buildings
 Remote management in hotels to enhance guest comfort
 Creates a comfortable environment in restaurants and cafes

 Industrial & Commercial Spaces

 Underfloor heating applications in warehouses and logistics facilities
 Energy-efficient heating management in shopping malls and retail stores
 Hygienic and comfortable temperature control in healthcare facilities

ETOP-R is an advanced control device that integrates with ETOP series ice and snow melting systems, allowing users to remotely control and monitor system operations. It enables users to adjust temperature settings and track system performance without physical access. This device is ideal for large-scale commercial and industrial applications, enhancing ease of use and improving system efficiency while conserving energy. Its durable and robust design ensures compatibility with outdoor environments.

Application Areas:

• Remote management of ETOP ice and snow melting systems
• Large-scale commercial and industrial applications
• Optimization of snow and ice melting systems for parking lots, roads, sidewalks, and roofs
• Safe surface control in winter conditions with remote access

ET-85 Smart Programmable Thermostat

The ET-85 is a smart, programmable thermostat designed for controlling electric underfloor heating and water heating systems. With WiFi connectivity, users can remotely manage their heating systems via a free mobile app, optimizing energy efficiency while maintaining comfort.

Offering weekly scheduling (5+1+1/7/6+1) with six different time slots per day, the ET-85 provides flexible heating management. Advanced features like open window detection, adaptive functions, floor temperature limit, and multi-sensor compatibility make it a smart and energy-efficient heating control solution.

With its patented magnetic connection system, the ET-85 enables easy installation and maintenance. The thermostat is compatible with multiple frame types and sensors, allowing for integration into various installation scenarios. Ideal for homes, commercial buildings, and industrial spaces, this thermostat enhances energy efficiency while providing a sustainable heating solution.

Application Areas:

• Electric Underfloor Heating Systems
• Water-Based Heating Systems
• Commercial and Residential Indoor Heating Solutions
• Bathroom and Kitchen Heating Systems
• Snow and Ice Melting Systems
• Energy-Efficient Smart Home Systems