MT26 Electronic Heating Thermostat - Analog Thermostat

Thermostat - MT26 Electronic Heating Thermostat - Analog Thermostat

This type electronic thermostat for mounting in standard wall box, the thermostat is adjustable to required temperature from +5/+40C, the LED shows that the heat is On, the thermostat is recommended for control of electric heating devices or on/off valve actuator used in water-based heating systems

MT26 Electronic Heating Thermostat - Analog Thermostat

Temperature Setting

Thermostat has a scale range of +5/+40 . To assist the adjust- ment, the thermostat has a LED which will glow RED when the heating is ON. The thermostat should be set to maximum tem- perature setting until the desired temperature of the room or floor is achieved. The control knob should then be turned back until the LED goes out. Fine adjustments can be made over the next 1/2 days to suit individual requirements. Thermostat Adjustment When the room temperature has been stabilized, the thermos- tat set position may be adjusted to match actual room tempera- ture. Measure the temperature of the room with an accurate thermometer. Remove control knob(1) and spin the pole(D), then reposition the control knob so that the indicated tempera- ture line shows the same as the measured temperature (picture 2). We have adjusted the temperature, please do not spin the pole when installation. Max./Min. Temperature Setting A locking mechanism is positioned behind the control knob to limit the amount of adjustment possible. By loosening the little screw C (picture2)the scale range can be locked, e.g. Between 20 and 25 . The above ring indicates the maximum tempera- ture and the below ring indicates the minimum temperature.

Thermostat Adjustment

When the room temperature has been stabilized, the thermos- tat set position may be adjusted to match actual room tempera- ture. Measure the temperature of the room with an accurate thermometer. Remove control knob(1) and spin the pole(D), then reposition the control knob so that the indicated tempera- ture line shows the same as the measured temperature (picture 2). We have adjusted the temperature, please do not spin the pole when installation.

Max./Min. Temperature Setting

A locking mechanism is positioned behind the control knob to limit the amount of adjustment possible. By loosening the little screw C (picture2)the scale range can be locked, e.g. Between 20 and 25 . The above ring indicates the maximum tempera- ture and the below ring indicates the minimum temperature

Applications:

• Residential heating systems (underfloor heating, radiator heating)
• Office heating systems
• Shop and commercial space heating systems
• Laboratories and areas requiring precise temperature control
• Warehouses and industrial areas
• Greenhouse and agricultural applications
• Bathroom and shower area heating systems
• Winter gardens and veranda heating systems
• Hotel and accommodation facility heating systems
• Hospitals and healthcare facility heating systems