MSHex Anti Condensation Motor Heater
Industrial Control Products - MSHex Anti Condensation Motor Heater
This flexible heating tape is used in explosive atmospheres to heat electric motors and generators at standstill. It provides reliable protection against corrosion damage.
MSHex Anti Condensation Motor Heater
- Silicone-free
- Self-limiting
- Other lengths on request
This flexible heating tape is used in explosive atmospheres to heat electric motors and generators at standstill. It provides reliable protection against corrosion damage and the associated mechanical breakdowns because it effectively prevents condensation from forming, even under extreme conditions. The heater is supplied ready to connect, which is done via an M20 screwed cable connection fed into an Ex e distributor, or is directly clamped to terminals in an Ex room without a screwed connection. As these heating tapes are self-limiting, overheating is prevented, even if they are laid on top of each other. An additional temperature limiter is not required.
Structure of the heating tape
- Copper power conductor wire 1.2 mm2 , nickel-plated
- Self-limiting plastic heating element
- Insulation sleeve made of FEP
- Tin-plated copper braiding
- Protective sleeve made of FEP
Application Areas:
- Industrial motors in hazardous areas
- Generators in hazardous areas
- Pump motors in hazardous areas
- Compressor motors in hazardous areas
- HVAC motors in hazardous areas
- Outdoor motors in hazardous areas
- Marine motors in hazardous areas
- Extruder motors in hazardous areas
- Hot press motors in hazardous areas
- Motors exposed to moisture and in hazardous areas
- Motors with frequent start-stop cycles and in hazardous areas.
MSHex Anti Condensation Motor Heater
| TECHNICAL DATA | |
| Max. temperatures at place of use | switched-on permanently -40 °C to +120 °C switched-off -40 °C to +170 °C |
| Nominal voltage | 208 V to 254 V or 110 V to 120 V |
| Heating output at 10 °C | 12 W, 24 W, 48 W and 96 W at a specific heating output of 45 W/m |
| Insulation testing | AC 1500 V for 1 minute |
| Terminal wires with FEP isolation | fine-stranded with tin-plated copper wires 1.5 mm2 , green and yellow protective earth conductor 2.5 mm2 |
| Heat conuctor closing | shrink-fit hose made of PTFE/FEP |
| Min. bending radius | 25 mm |
| Size of heating tape diameter | 10.2 mm x 4.8 mm |
MSHex Anti Condensation Motor Heater
- Silicone-free
- Self-limiting
- Other lengths on request
This flexible heating tape is used in explosive atmospheres to heat electric motors and generators at standstill. It provides reliable protection against corrosion damage and the associated mechanical breakdowns because it effectively prevents condensation from forming, even under extreme conditions. The heater is supplied ready to connect, which is done via an M20 screwed cable connection fed into an Ex e distributor, or is directly clamped to terminals in an Ex room without a screwed connection. As these heating tapes are self-limiting, overheating is prevented, even if they are laid on top of each other. An additional temperature limiter is not required.
Structure of the heating tape
- Copper power conductor wire 1.2 mm2 , nickel-plated
- Self-limiting plastic heating element
- Insulation sleeve made of FEP
- Tin-plated copper braiding
- Protective sleeve made of FEP
Application Areas:
- Industrial motors in hazardous areas
- Generators in hazardous areas
- Pump motors in hazardous areas
- Compressor motors in hazardous areas
- HVAC motors in hazardous areas
- Outdoor motors in hazardous areas
- Marine motors in hazardous areas
- Extruder motors in hazardous areas
- Hot press motors in hazardous areas
- Motors exposed to moisture and in hazardous areas
- Motors with frequent start-stop cycles and in hazardous areas.
