Mini Heater
Control Panels And Control Elements - Mini Heater
Function The Mini-heater can be used without a temperature limiter in hazardous areas providing the installation instructions are carefully adhered to. Attaching the Mini-heater to a metal body can reduce the surface temperature.
- Small, compact structure
- No temperature control necessary
- Available in different voltages
- Easy wiring
The Mini-heater protects from frost and prevents the formation of condensation water inside enclosures and small electrical control panels. The explosion-proof version can be mounted in Ex-enclosures according to EN 60079-7.
Installation instructions for use in Ex areas The temperature class can be specified:
- via a routine thermal test and approval by an authorised Ex inspector
- via a prototype test, e.g. together with other equipment based on presentation by a recognised testing agency
Installation exclusively in Ex enclosures according to EN 60079-7.
Structure A heating resistor is flameproof encapsulated in an anodised aluminium enclosure. The terminal leads integrated on both sides make the device a ready-to-connect heater. The heater is mounted by means of two fixing holes of ∅ 3.2 mm. A heater of similar dimensions and power output is available for use in safe areas. This version is supplied without the earth connection.
Function The Mini-heater can be used without a temperature limiter in hazardous areas providing the installation instructions are carefully adhered to. Attaching the Mini-heater to a metal body can reduce the surface temperature.
Mini Heater
| TECHNICAL DATA | |
| Nominal voltage | 230 V, special voltages (6 to 400 V) available on request |
| Nominal output | 6 W |
| Max. permissible surface temperature | +95 °C |
| Enclosure material | anodised aluminium |
| Connection leads | H07G-K or N4GAF - 0.75 mm² standard length 0.5 m each side |
| Fixing details | 2 fixing holes, ∅ 3.2 mm |
| Weight | approx. 46 g |
- Small, compact structure
- No temperature control necessary
- Available in different voltages
- Easy wiring
The Mini-heater protects from frost and prevents the formation of condensation water inside enclosures and small electrical control panels. The explosion-proof version can be mounted in Ex-enclosures according to EN 60079-7.
Installation instructions for use in Ex areas The temperature class can be specified:
- via a routine thermal test and approval by an authorised Ex inspector
- via a prototype test, e.g. together with other equipment based on presentation by a recognised testing agency
Installation exclusively in Ex enclosures according to EN 60079-7.
Structure A heating resistor is flameproof encapsulated in an anodised aluminium enclosure. The terminal leads integrated on both sides make the device a ready-to-connect heater. The heater is mounted by means of two fixing holes of ∅ 3.2 mm. A heater of similar dimensions and power output is available for use in safe areas. This version is supplied without the earth connection.
Function The Mini-heater can be used without a temperature limiter in hazardous areas providing the installation instructions are carefully adhered to. Attaching the Mini-heater to a metal body can reduce the surface temperature.
