HEATER CABLE MOUNTING ELEMENTS

Heat Resistant Silicone

Areas of Use

• In areas exposed to continuously high temperatures.
• As a liquid gasket to prevent oil leakage in explosion engines.
• In areas continuously exposed to machine and motor oils, such as motor covers.
• As an adhesive and insulator in electric heating devices.
• As a sealing material and vibration absorber in hot air ducts and sheet metal joints.
• As an insulation material and adhesive to protect electrical and electronic circuits from heat and humidity.

Features

• Ready-to-use, single-component sealing material.
• Resistant to temperatures up to 300°C.
• Light acetate odor disappears after drying.
• Solvent-free.
• Maintains its elasticity permanently.
• Resistant to abrasion.
• Unaffected by weather conditions approximately 1 hour after application (at +20°C).
• Cured surfaces do not adhere to other materials.
• Cannot be painted.

Pre-Application Preparation

• The surfaces to be applied must be solid, clean, dry, and free from oil and dust.
• To ensure a smooth filling, tape can be applied to both edges.

Application

• Before use, the tip of the cartridge should be cut, and the plastic nozzle should be attached.
• The nozzle tip should be cut according to the width of the application surface, then the cartridge should be inserted into the gun.
• During application, joints must be filled in one go without leaving any gaps.
• After applying the silicone to the joints, the surface should be immediately smoothed using a spatula.
• After application, the masking tape should be removed.
• Opened packages should be used as quickly as possible.
• Do not apply in outdoor areas during rainy weather.

Post-Application Cleaning

• Contaminated areas and used tools should be cleaned within 10 minutes using industrial solvent (white spirit) or alcohol.
• Once cured, it can only be removed mechanically.