The electronic temperature controller type ELTC/ is designed for use as an ambient thermostat or surface thermostat with remote sensor. Cable glands and terminations are provided for the power connection.
The electronic temperature controller type ELTC/ is designed for use as an ambient thermostat or surface thermostat with remote sensor. Cable glands and terminations are provided for the power connection. The unit is supplied in a weather proof polycarbonate casing for wall mounting, with a transparent (ELTC/05 = grey) cover. The controller should be protected from direct sunlight when used outdoors.
Function:
If the sensed temperature is lower than the adjusted set point, the relay contact closes and the heating switches on. The yellow LED glows while the contact is closed. During sensor discontinuity or sensor short circuit, the heating is switched off!
Applications:
| TECHNICAL DATA | |
| Temperature ranges | 0 up to +200°C |
| Sensor | Pt100 (2 wire) |
| Nominal voltage | 230V 50 Hz |
| Switching capacity | 20A |
| IP rating | IP66 |
| Power supply | 230V with shock-proof-plug and 3m connection cable |
| Installation | 7-pol., combined for heating and sensor |
| Ambient temperatures | -30°C...+60°C |
The electronic temperature controller type ELTC/ is designed for use as an ambient thermostat or surface thermostat with remote sensor. Cable glands and terminations are provided for the power connection. The unit is supplied in a weather proof polycarbonate casing for wall mounting, with a transparent (ELTC/05 = grey) cover. The controller should be protected from direct sunlight when used outdoors.
Function:
If the sensed temperature is lower than the adjusted set point, the relay contact closes and the heating switches on. The yellow LED glows while the contact is closed. During sensor discontinuity or sensor short circuit, the heating is switched off!
Applications: