Can be used as temperature monitoring and ambient and surface thermostat for frost protection. Suitable for resistance heating lines and self-regulating heating cables.
The electronic temperature controller ELTC 05-Frostcontrol is designed for use as an ambient thermostat and surface thermostat with remote sensor. Cable glands and terminals are provided for power input. The unit is supplied in a weather proof plastic enclosure for wall mounting, with a grey cover. The controller should be protected from direct sunlight when used outdoors. In case of use as ambient temperature controller, the sensor cable is shortened to allow fastening of the sensor sleeve within the M12 gland. The sleeve should project by approximately 15 mm
Advantages:
Applications:
| TECHNICAL INFORMATION | |
| Supply voltage | 230 V, +/- 10 %, 50 Hz, optional voltages upon request |
| Switching capacity | 16 A |
| Hysteresis | Approx. 1 Kelvin |
| Measurement input | Pt100 DIN 2-wire, with 5 m PVC connecting cable (temp. max. 90 °C) |
| Switching point ELTC/05 | +3 °C (set point) |
| Ambient temperature | -30 up to +60 °C |
| Control characteristics | Dual mode controller |
| Output | 1 relay contact |
| LED | Heating ON (yellow) |
| Enclosure | Polycarbonate |
| Dimensions | 130 x 130 x 75mm |
| IP rating | IP 65 |
| Weight | 520 g |
The electronic temperature controller ELTC 05-Frostcontrol is designed for use as an ambient thermostat and surface thermostat with remote sensor. Cable glands and terminals are provided for power input. The unit is supplied in a weather proof plastic enclosure for wall mounting, with a grey cover. The controller should be protected from direct sunlight when used outdoors. In case of use as ambient temperature controller, the sensor cable is shortened to allow fastening of the sensor sleeve within the M12 gland. The sleeve should project by approximately 15 mm
Advantages:
Applications: